← Feed

Posts

• View post

  Thank you everyone who contributed! I added a brim and ensured there are no draft in the room, and now the part printed without any warping or peeling. <3 #3DPrinting

• View post

  If you are into renewable energy and offshore wind farms, you might find this blog post interesting. It's written in some heathen language full of mysterious diacritics, but at least there are photos: https://slomaislonce.pl/posts/09-polski-offshore/ #blog #renewables #OffshoreWindFarms #GreenEnergy

• View post

  I have a weird problem with #3DPrinting Whenever I print things that should screw into other things, they don't fit. For example with OpenGrid, when I print the MultiConnect snap and the screw that goes into it, I need to scale it down by 10% to be able to screw it in. Is this normal?

• View post

  What is the most powerful computer that accepts 12V as the power input? Preferably something expendable. Looking mostly for first hand experience #askFedi

• View post

  That was a heavy episode, with a heated discussion based on what Linus Torvalds said about AI in Linux. The crew has differing opinions about AI, it's cost (environmental, ethical) and actual usefulness. Personally, I am much closer to Joe's side of the argument than Graham's. I highly recommend to listen to it and make your own opinion. https://latenightlinux.com/late-night-linux-episode-396/

• View post

  I just realized a surname is just a Foreign Key

• View post

  I have started a new blog. It's called Słoma i Słońce (Straw and the Sun), and it will be about other than computers and IT. It will be about gardening, solarpunk, climate change, politics, DIY, living in the countryside. And it's in Polish because there I want to write about local things for a local audience. But I am sharing it here as well, because maybe someone will still want to check it out, and at least the images speak for themselves. I am selfhosting it on a Raspberry Pi pow...

• View post

  If sticks are made from wood, why isn't wood sticky? Makes you think.

• View post

  If I wanted to record a short audio clip in Linux, is still Audacity the tool to go, or is there something new and better?

• View post

  Seriously, what happened to Google Translate? Now translating a single word can take even something like ten seconds, and the quality feels worse. (That is a rhetorical question, I know exactly what is wrong)

• View post

  Excellent news. Lignite is one of the worst, most environmentally harmful ways of producing energy, and turning the mining area into a recultivated tourist attraction will restore most of the harm it caused. https://tvpworld.com/94468318/polands-largest-open-pit-mine-belchatow-to-become-giant-artificial-lake

• View post

  Hey, Which capital city is the most giggly? Teeheeran

• View post

  Dzisiaj widziałem osobę czarnoskórą jak jechała na trójkołowym rowerze, a teraz jestem w pociągu, i ludzie z rowerami rozmawiają po niemiecku! *Głosem z videł z żółtymi napisami* To już, zaczyna się! Chyba wszyscy wiemy dokąd to zaprowadzi!

• View post

  Most of my bots have not been working through yesterday, because I was sure I don't need Docker anymore on my VPS and I removed it. Narrator: Indeed he needed Docker on his VPS.

• View post

  I used to run octoprint on a Raspberry Pi, and there everything worked fine. I moved to a Wyse 5070 and there the printing also works, but most times the webcam feed looks like this. The deployment has been the same on both platform, through Docker. Any suggestions, dear fedicians? #3dPrinting #OctoPrint

• View post

  I just realized one thing: I totally stopped watching IT Youtube. I used to watch that LTT news channel, some Gamers Nexus, Jeff G, Craft Computing, Explaining Computers, and now I can't be bothered to watch any of it.

• View post

  Today I TIL there is a difference between su and su - https://unix.stackexchange.com/questions/7013/why-do-we-use-su-and-not-just-su

• View post

  I miss the times when saying "I can has cheeseburger" was peak internet comedy.

• View post

  Another episode of working in my homelab

• View post

  I don't have a KVM, so I went to the attic to my NAS, attached a spare monitor and a keyboard, rebooted, went into BIOS and switched all fans to full speed. Getting ready for the worst part of the heat wave.

• View post

  Did you know that ctrl+x is forbidden in Italy? Because there you cannot cut the pasta

• View post

  Yes, I am jumping on the hype bandwagon, but that hype is totally deserved, I've been listening to Angine De Poitrine for the last week on repeat, and they are EPIC https://www.youtube.com/watch?v=0Ssi-9wS1so #music

• View post

  My internet browser only shows content created before 1 BC. I have the perfect AD blocker.

• View post

  Which German bread has the most complicated shape? Das Mandelbrot

• View post

  When a person with 33k followers retoots a toot on your small selfhosted instance

• View post

  New blog post! This time it's about procrastination, networking, and most of all about configuring MikroTik devices to work as NATless Access Points. This blog post was long in the making, but eventually I sat down and wrote it in one go based on the notes I was making along the way. And I hope it will be useful for homelabbers and other people interested in network devices. @homelab https://stfn.pl/blog/97-mikrotik-ap-without-nat/ #homelab #networking #mikrotik #blog

• View post

  I think I decided. I will be moving my #fosstodon account here. There are still some technical preparations I need to do, and some research. My goal is to migrate my Fosstodon account into this one. I hope migrating an account into another that has existed for some time is not a problem? I haven't seen any warning in the docs so far. If the migration breaks I will still have my @stfn account :)

• View post

  "In order to access this webpage, please cast a fireball". I'm tired of all these mage verifications.

• View post

  My dad's rainwater collecting system. Simple but it works #solarpunk #allotmentGardens

• View post

  Wow, this Astrobin Image of the Day is extremely cool! It shows how Proxima Centauri, our nearest star, is moving through the night sky over the years. Since 2011 it has moved much less than the size of the Moon, but it can be observed with the right telescopes. The night sky is not static, things change even in the timespan of human lives. https://fedi.stfn.pl/@astrobin_iotd/statuses/01KQAGH7WV143SKC62VS9QR2TM #astronomy