← Feed

Posts

• View post

  whee, I managed to do a thing and feel good about it!

• View post

  oh no… just found somebody selling a huge pile of old east german and soviet test equipment, radios, TVs, video cameras and similar stuff locally on kleinanzeigen D: (anyone wanna go? <.<)

• View post

  guess who just got a fast ADC and is learning raylib to do something stupid

• View post

  @janamarie@mystical.garden at this point nothing they do surprises me any more. They're just fully in the bridge burning business now.

• View post

  wolves in a meeting: "ok, so without any further awoo…"

• View post

  caveman who discovered iron oxide pigment to girl writing on the wall using a piece of charcoal: "have you thought about rewriting this in rust?"

• View post

  ok, I think I'm done with this project? it now plays conway's game of life and creepy noises, all from a single STM32G431 MCU with minimal external components, which is really all you can want from some lowfi analogue TV stuff. In the process of making the audio work I ended up changing from channel 2 to channel 3 to get rid of the interference from the 48MHz clock I use for audio, which also means I'm running the CPU faster and get a little bit more processing time. Nu...

• View post

  anyone here has any experience doing remote debugging on ARM devices using Gram/Zed? I've been using cortex-debug in VSCode before but there is no such thing for Gram yet. I tried setting things up manually but had no real success. I can get GDB to connect to OpenOCD but I can't get it to automatically reset the device and upload the new binary. Giving GDB a file with startup commands just makes Gram lock up when starting the debug session.

• View post

  finally, analogue CDs wii shop theme remix by @miunau

• View post

  spending some more time improving the quality of the RF output from the tinyvision library. there were some unexplained weirdnesses and nonlinearities before (what a surprise, turns out micro controllers are not meant to generate RF) which should be fixed now, leading to an *even better* image and more stable sync!

• View post

  aaaand here we go, composite video and line level audio output on the TVTHING with the latest version of tinyvision. for all the ones who want to keep the airwaves clean.

• View post

  cursing the person who made it impossible to get a cheap camera in europe that can record for more than 29 minutes and 59 seconds as I try to record a video of me playing back a 30 minute record

• View post

  🐾

• View post

  Wheeee! I've finally cleaned up the schematics and layout for the videothing TV transmitter board for release and updated the tinyvision library to work with it! Experience television like you never have before! Go check it out! https://git.sr.ht/~slyka/videothing

• View post

• View post

  why am I considering buying an old PDA off of ebay?!

• View post

  Ran a bit of a long term test with my VTR to see if it's stable and I was able to record around 17 minutes before it started losing sync again. Ugh… So either the drum speed is slowly drifting as it warms up, or the camera frame rate is slowly drifting, or the load on the motor increases as we get towards the end of the tape, or it's something completely different… I should probably repeat that test with a quartz locked camera to at least mostly rule that out as the source of th...

• View post

  bogos bevlopt

• View post

  Did you know that you can buy these funky little "flat" CRT displays on aliexpress for like 25 bucks? They run on 12V and take composite video input. Not sure what I'm gonna do with it yet but I'm tempted to create some kinda handheld game thing? Or a scientific calculator? Imagine how cool a little RPN calculator running forth or something would be!

• View post

  if anyone feels like poking at the freecad CAD data for my record lathe (or building their own), it's now all available on sourcehut <.< https://sr.ht/~slyka/SL-24/sources also put up the programs for controlling it and for deriving the compensating filter curves. more to come soon? hopefully? EDIT: Added a picture of the thing! #RecordLathe #freecad